Fittings-manufacture,factory,supplier from China

flange connections, which are used for two kinds of pipes, fittings, or devices, are first fixed in a flange flange, and between the two flanges, flange pads are bolted together, which completes the connection. Some pipe fittings and equipment have their own flange, also belong to the flange connection. Flange connection is an important connection mode in pipeline construction. Flange connection is easy to use and can withstand greater pressure. Flange connection is widely used in industrial pipeline. In the home, the pipe diameter is small, and is low pressure, not visible flange connection.

This St andard covers pressure–t emperature  ratings, materials, dimensions, tolerances, marking, testing, and methods of designat ing openings for pipe  flanges and flanged fittings. Included are                                             Production Process:Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995.

1. Each flange or pipe fittings is wiped after ultrasonic cleaning.2. Each flange or pipe fittings is individually packaged with bubble protective film and placed in a wooden box.3. All products are packed in plywood boxes. For larger size flanges, packed in plywood pallets. Or you can customize the packaging by yourself.4. Shipping marks can be made as required5. Product label can be engraved or printed.

Flanged fittings with rating class designation400, 600, 900, and 1500 in sizes NPS 1⁄2 through NPS 24and flanged fittings with rating class designation 2500in sizes 1⁄2 through NPS 12 that are acknowledged inNonmandatory Appendix E in which only U.S.Customary units are provided 1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

Blind Flanges. Blind flanges need not be facedin the center if, when this center part is raised, its diameter is at least 25 mm (1 in.) smaller than the inside diameter of fittings of the corresponding pressure class, as given in Tables 9 and 12 (Tables II-9 and II-12) or25 mm (1 in.) smaller than the mating pipe inside diameter.  1. Standard:GOST 12820- 80  GOST 12821- 80 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

ASME/ANSI B16.1 - 1998 - Cast Iron Pipe Flanges and Flanged Fittings -Class 125 Flanges - outside and inside diameters, bolt circles, numbers and diameters of bolts  1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7.

(1) flanges and flanged fittings made from cast orforged materials (2) blind flanges and certain reducing flanges made from cast, forged, or plate materials1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

PVC pipes,pipe fittings and valves is widely used in water supply,chemical industry,water treatment,enviromental protection,pharmaceutical area etc.It has following advantages:Light weightHigh strengthLow resistanceCorrosion resistanceEasy installationLong service lifeLow costNon-toxic and sanitationProduct Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004.

Flanged fittings with rating class designation 150 and 300 in sizes NPS 1 ⁄2 through NPS 24, with requirements given in both metric and U.S. Customary units with diameter of bolts and flange bolt holes expressed in inch unitsProduct Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.

In addition to the range of PN 2,5 to PN 40 DIN origin flanges contained in the ISO standard, EN 1092-1 also includes flanges up to PN 400. 1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order

In addition to the range of PN 2,5 to PN 40 DIN origin flanges contained in the ISO standard, EN 1092-1 alsoincludes flanges up to PN 400. 1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:BS4504 2.

 EN1092-1 FLANGE BS4504Size range: DN15 to DN2000Design:        type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking                       type12 slip on flange, type 13 threaded flangePressure:     PN6, PN10, PN16, PN25, PN40, PN64, PN100Material:  &n

The tabulated ratings for welding neck flanges areindependent of components to which they may be attached, and the pressure rating of the flange shall not be exceeded. Attachment welds should be made in accordance with the applicable code or regulation. See para. 6.7 and Figs. 1 through 3 for weld end dimensional requirements.1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.

such as oil, chemical industry, water conservancy, electric power, boiler, machinery, metallurgy, sanitary construction etc1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7.

It should be noted that this standard does not cover all flange sizes covered by the above DIN Standards.For flange dimensions not specified here, refer to DIN 2501-1. 1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1.

Flange:Flange is the parts which connects two pipe endsFlange Application:Flange is widely used in constructions, petroleum, chemical industry, power, ship building, paper making, metallurgy, water supply and sewage work, light and heavy industry, plumbing and electric, etc.Flange Type:Flat Plate Flange, Slip-on Flange, Blind Flange, Weld Neck Flange, Threaded Flange, Socket Weld Flange, etc. Flange Standard:ANSI, AWWA, ASME, DIN, EN, BS, JIS, GOST, SABS, etc.1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133.

whereas ISO 7005-1 included in its scope both the original DIN based flanges and also the originalANSI/ASME based flanges, EN 1092-1 contains only the PN based flanges. CEN/TC 74 has produced a separate series of standards, EN 1759-1, EN 1759-3 and EN 1759-4, dealing with the ANSI/ASME based flanges in their original Class designations;1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

A flanged joint is composed of separate and independent, although interrelated components: the flanges, gasket, and bolting, which are assembled by another influence, the assembler. Proper controls must be exercised in the selection and application for all these elements to attain a joint that has acceptable leak tightness. Special techniques1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

Face finish: The finish on the face of flange is measured as an Arithmetical Average Roughness Height(AARH). The finish is determined by the standard used. For example, ANSI B16.5 specifies face finishes within a range 125AARH-500AARH(3.2Ra to 12.5Ra). Other finishes are available on requst, for example 1.6 Ra max,1.6/3.2 Ra, 3.2/6.3Ra or 6.3/12.5Ra. The range 3.2/6.3Ra is most common.Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3.

ANSI B16.5/ANSI B16.47/API 605 MSS SP44,AWWA C207-2007/ANSI B16.48DIN2503/2502/2576/2573/860296/86030/2565-2569/2527/2630-2638UNI6091/6092/6093/6094/6095/6096/6097/6098/6099JIS B2220/B2203/B2238/G3451GOST 1836/1821/1820BS4504EN1092SABS1123    1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

In BS EN 1092-1:2007, the materials and material groups used in the manufacture of flanges are given in Table 9 and their corresponding.Pressure/Temperature ratings are given in Annex G (normative). Additional materials that are widely in used in Europe are listed in Annex D (informative) but BS EN 1092-1:2007 contains no corresponding Pressure/Temperature information for these materials. National Annex NA (informative) contains guidance on Pressure/Temperature ratings for materials S235JR/1.0038 and ASME SA 105, which are predominantly used in the UK.1. Standard:EN1092-1 2.